Passeio pela água da calha

The drop is what guests remember, but the pumps, filtration and boat turnaround are what decide whether the ride opens on time every morning.

A flume ride is the strongest family attraction a park can add to a hot climate, because it rewards guests with a soaking rather than frightening them.

Todos os valores são valores de referência e estão confirmados na proposta de engenharia da sua obra.

The ride combines a fibreglass flume mounted on steel supports with a lift section, themed scenery and a final splash drop that throws water high enough for spectators to enjoy. Boats carry several guests each, and capacity is set by boat count, lift speed and the loading sequence. Water volume, pump curve and filtration are engineered against the flume length and the climate, because evaporation and splash losses differ enormously between sites.

Pumps, filtration and water treatment are the parts guests never see and operators always argue about. Size the circulation for a full water turnover each day, include a strainer and debris screen upstream of the pumps, and plan a dosing routine that keeps water clear in heavy use. A park running a splash attraction such as our atire nos pára-quedas passeio aquático alongside a flume can share a filtration room, spare pumps and one trained water technician.

Capacity comes from the number of boats in circulation and the speed of the lift, not from the length of the drop. Design the station so one boat unloads while the next loads, keep a holding area before the lift, and plan a dry storage bay for boats during maintenance. Spare boats are worth the investment – one damaged hull in peak season otherwise reduces capacity for weeks.

The splash zone needs its own drainage and a non slip surface, and the viewing area must sit outside the wet envelope so guests stay dry unless they choose otherwise. Daily checks cover pump noise and pressure, water level, boat hulls and restraint bars. Flume sections are moulded composite, and the support structure is protected steel, so the weekly inspection looks at joint bolts, pump seals and the aço inoxidável fastenings that hold the wet sections together.

As opções específicas do site incluem: Tema, projeto de barco, drop height, splash effects and station scenery.

Como um direto fornecedor nós controlamos toda a cadeia: engenharia, produção, testes de fábrica e embalagem para exportação ocorrem dentro de um 125,000 base de produção de m², e a lista de peças de reposição segue a máquina até o seu local. Os sistemas de água são projetados de acordo com o seu local, então a sala das plantas, deck e drenagem fazem parte do mesmo conjunto de desenhos.

Compartilhe o terreno e os detalhes da água e voltaremos com um layout faseado da água: o que abre primeiro, o que se segue, e quanto custa cada fase.