In markets where power and fuel are expensive and skilled ride technicians are scarce, non-powered play is the most reliable way to open a family attraction.
This project built a play park around a slide complex with climbing and swing structures, designed so a small team can supervise the whole site.
Especificações principais
| Item | Referência |
|---|---|
| País | Cameroon |
| Tipo de projeto | Non-powered family park |
| Contract value | USD 173,302 class project |
| Escopo | Equipamento, suporte para envio e instalação |
| Mistura | Complexo de slides, escalando, balanços, toddler area |
| Advantage | Sem motores, no fuel, low operating cost |
Todos os valores são valores de referência e estão confirmados na proposta de engenharia da sua obra. Operators planning a similar project usually start from our non powered park guide.
Designing for Low Operating Cost
The park carries no motors, no fuel and no ride operators, only attendants and cleaners. All the investment sits in structures, surfacing and shade, and the maintenance routine is visual inspection plus periodic bolt and net checks – a model that survives where spare parts are hard to obtain.
Equipment Mix and Zoning
A multi lane slide complex anchors the park, with climbing and balancing elements for older children and swings and sand play for younger visitors. The toddler area sits closest to the seating so parents can supervise from one place, which is also the most efficient use of staff.
Surfacing and Heat Management
Impact surfacing was laid per zone with fall heights recorded, and shade covers the busiest structures plus the seating. In a hot climate the shade determines whether families stay through the middle of the day, which is the difference between a busy park and an empty one.
Opening and Running the Park
Equipment shipped with installation drawings, and local teams assembled under factory supervision before commissioning checks. The park opened with a written inspection routine and a small spares shelf, following EM 1176 based playground safety practice.
O que você pode personalizar
Você decide o visual, mantemos o padrão de engenharia: Disposição, equipment mix, surfacing and shade.
Construímos atrações em vez de revendê-las, é por isso que as questões técnicas voltam como desenhos em vez de folhetos – e por que um 125,000 m² base de produção pode absorver a personalização sem alterar a data de entrega. Estruturas não motorizadas são enviadas com dados de altura de queda e recomendações de superfície para cada plataforma e saída deslizante.
Compartilhe o layout do local e produziremos um plano de zona mostrando as estruturas, emergindo, drenagem e a sequência para construí-los.
