In northern Europe a carousel needs a winter plan as much as a summer one, and that plan is written before the machine is ordered.
This project installed a two storey carousel with a specification prepared for cold, wet conditions and a documented shutdown and restart procedure.
Ključne specifikacije
| Artikal | Referenca |
|---|---|
| Zemlja | Lithuania |
| Vrsta projekta | Double decker carousel |
| Vrijednost ugovora | EUR 156,276 razredni projekt |
| Klima | Cold winters, wet springs |
| Specifikacija | Low temperature lubricants and sealed electricals |
| Operacija | Seasonal with a prepared winter shutdown |
Sve brojke su referentne vrijednosti i potvrđene su u inženjerskom prijedlogu za vaše mjesto. Galvanised steel and coated fasteners are specified for cold, wet conditions. Vidjeti Galvanization.
Cold Climate Specification
Drive lubricants, control cabinets and finishes were specified for low temperatures, and drainage around the platform was designed so water cannot freeze under the base. Those details cost little at order stage and prevent the corrosion and cracking that come from freeze-thaw cycles.
Assembly and Commissioning
The carousel was assembled in the standard sequence with the platform, frame, drive, upper structure and figures installed in order, followed by commissioning and restraint checks. Because parts were loaded in assembly sequence, the crew never reopened a crate.
Evening Trade in a Short Season
Lighting and music were designed as a show, and the ride trades into the evening during the operating season when the park is at its busiest. The lighting also becomes the attraction on short winter days, when guests arrive in the dark.
Winter Shutdown and Spring Restart
Before winter the drive is greased for low temperature, the canopy checked for water traps and the platform cleared. At the start of the season the routine is a full electrical check, brake test and slow rotation before guests board – the same disciplined approach we recommend for any double decker carousel.
Prilagodba i prilagođavanje stranice
Vi odlučujete o izgledu, držimo inženjerski standard: Boje, brojke, nadstrešnica, lighting and winter specification.
Iza ovog proizvoda stoji dvadeset godina proizvodnje i izvoza, proizvedeno u a 125,000 m² objekta s in-house dizajn, alata i kontrole kvalitete. Rad na projektu uključuje nacrte izgleda, fazni popis opreme i dokumentacija koju možete predati izravno lokalnom izvođaču.
Dajte nam podatke o mjestu i rok na koji radite – mapirati ćemo faze, opremu i nacrt troškova u odnosu na nju.
