In northern Europe a carousel needs a winter plan as much as a summer one, and that plan is written before the machine is ordered.
This project installed a two storey carousel with a specification prepared for cold, wet conditions and a documented shutdown and restart procedure.
Mga Pangunahing Detalye
| item | Sanggunian |
|---|---|
| Bansa | Lithuania |
| Uri ng proyekto | Double decker carousel |
| Contract value | EUR 156,276 class project |
| Klima | Cold winters, wet springs |
| Pagtutukoy | Low temperature lubricants and sealed electricals |
| Operasyon | Seasonal with a prepared winter shutdown |
Ang lahat ng mga numero ay mga halaga ng sanggunian at nakumpirma sa panukala sa engineering para sa iyong site. Galvanised steel and coated fasteners are specified for cold, wet conditions. Tingnan mo Galvanization.
Cold Climate Specification
Drive lubricants, control cabinets and finishes were specified for low temperatures, and drainage around the platform was designed so water cannot freeze under the base. Those details cost little at order stage and prevent the corrosion and cracking that come from freeze-thaw cycles.
Assembly and Commissioning
The carousel was assembled in the standard sequence with the platform, frame, drive, upper structure and figures installed in order, followed by commissioning and restraint checks. Because parts were loaded in assembly sequence, the crew never reopened a crate.
Evening Trade in a Short Season
Lighting and music were designed as a show, and the ride trades into the evening during the operating season when the park is at its busiest. The lighting also becomes the attraction on short winter days, when guests arrive in the dark.
Winter Shutdown and Spring Restart
Bago ang taglamig ang drive ay greased para sa mababang temperatura, the canopy checked for water traps and the platform cleared. Sa simula ng season ang routine ay isang buong electrical check, brake test and slow rotation before guests board – the same disciplined approach we recommend for any double decker carousel.
Pag-customize at Site Fit
Ikaw ang magpapasya sa hitsura, pinapanatili namin ang pamantayan ng engineering: Mga kulay, mga numero, canopy, lighting and winter specification.
Dalawampung taon ng pagmamanupaktura at pag-export ang nakatayo sa likod ng produktong ito, ginawa sa a 125,000 m² pasilidad na may in-house disenyo, tooling at kontrol sa kalidad. Kasama sa gawaing proyekto ang mga guhit ng layout, mga listahan ng mga phased na kagamitan at dokumentasyon na maaari mong ibigay diretso sa isang lokal na kontratista.
Ibigay sa amin ang mga detalye ng site at ang deadline kung saan ka nagtatrabaho – imamapa natin ang mga yugto, ang kagamitan at ang balangkas ng gastos laban dito.
