In northern Europe a carousel needs a winter plan as much as a summer one, and that plan is written before the machine is ordered.
This project installed a two storey carousel with a specification prepared for cold, wet conditions and a documented shutdown and restart procedure.
Wichtige Spezifikationen
| Artikel | Referenz |
|---|---|
| Land | Lithuania |
| Projekttyp | Double decker carousel |
| Contract value | EUR 156,276 class project |
| Klima | Cold winters, wet springs |
| Spezifikation | Low temperature lubricants and sealed electricals |
| Betrieb | Seasonal with a prepared winter shutdown |
Alle Angaben sind Richtwerte und werden im Planungsvorschlag für Ihren Standort bestätigt. Galvanised steel and coated fasteners are specified for cold, wet conditions. See Galvanization.
Cold Climate Specification
Drive lubricants, control cabinets and finishes were specified for low temperatures, and drainage around the platform was designed so water cannot freeze under the base. Those details cost little at order stage and prevent the corrosion and cracking that come from freeze-thaw cycles.
Assembly and Commissioning
The carousel was assembled in the standard sequence with the platform, rahmen, fahren, upper structure and figures installed in order, followed by commissioning and restraint checks. Because parts were loaded in assembly sequence, the crew never reopened a crate.
Evening Trade in a Short Season
Lighting and music were designed as a show, and the ride trades into the evening during the operating season when the park is at its busiest. The lighting also becomes the attraction on short winter days, when guests arrive in the dark.
Winter Shutdown and Spring Restart
Before winter the drive is greased for low temperature, the canopy checked for water traps and the platform cleared. At the start of the season the routine is a full electrical check, brake test and slow rotation before guests board – the same disciplined approach we recommend for any double decker carousel.
Anpassung und Site-Fit
Sie bestimmen den Look, Wir halten den technischen Standard ein: Farben, Figuren, Überdachung, lighting and winter specification.
Hinter diesem Produkt stehen zwanzig Jahre Herstellung und Export, hergestellt in a 125,000 m² Anlage mit hauseigenem Design, Werkzeugbau und Qualitätskontrolle. Die Projektarbeit umfasst Layoutzeichnungen, Gestaffelte Ausrüstungslisten und Dokumentationen, die Sie direkt an einen örtlichen Auftragnehmer weitergeben können.
Teilen Sie uns die Standortdetails und den Termin mit, an dem Sie arbeiten – Wir werden die Phasen kartieren, die Ausstattung und die Kostenaufstellung dazu.
