말레이시아 무전력 공원 프로젝트: I-시티 규모

This was one of our larger non-powered projects in Southeast Asia, and the design brief was simple: keep families on site for three hours without a single motor.

The park combined a slide complex with climbing and swing structures, arranged so guests move through the site rather than queue at one attraction.

모든 수치는 참조 값이며 귀하의 현장에 대한 엔지니어링 제안에서 확인되었습니다..

The plot was divided into a main play zone, a toddler area and a shaded family zone with seating and service points. The slide complex sat where it is visible from the entrance, while older childrens climbing equipment was placed furthest from the toddler area to keep supervision simple and reduce collisions.

Structures were specified for heat, 습도와 폭우: protected steel frames, UV stable finishes and netting that keeps its strength when wet. Impact surfacing was chosen to drain rather than hold water, and fall heights were recorded on the layout so the park can check depths on a schedule.

The equipment shipped in phases so the park could open its main zone first and complete the secondary areas afterwards. Installation ran under factory supervision with local labour, followed by commissioning checks and staff training on daily inspection, supervision positions and capacity control.

Without machines, the operating cost is staffing, cleaning and surfacing maintenance – which is why the park carries a small team and keeps entry pricing simple. The same logic is described in our guide to a non powered amusement park, and the safety approach follows recognised playground practice such as 안에 1176.

보이는 모든 것은 당신이 정의하는 것입니다: 구역 레이아웃, 장비 믹스, 표면 처리 및 그늘.

모든 유닛은 125,000 테스트 기록이 있는 중국의 m² 공장, 도면 및 권장 예비 부품 목록, 그게 뭐야? 제조 파트너 단순히 청구서가 아닌 양도해야 함. 무동력 구조물에는 모든 플랫폼 및 슬라이드 출구에 대한 추락 높이 데이터 및 표면 권장 사항이 함께 제공됩니다..

사이트 레이아웃을 공유하면 구조를 보여주는 구역 계획을 생성합니다., 표면화, 배수 장치 및 배수 장치를 만드는 순서.