This project was built for a market with heavy rain and long school holidays, so the design had to keep guests comfortable in the heat and drain quickly in a storm.
The result was a non-powered park with a strong anchor slide complex, climbing and net elements, and a shaded family zone at its centre.
Wichtige Spezifikationen
| Artikel | Referenz |
|---|---|
| Land | Philippinen |
| Projekttyp | Non-powered family park |
| Contract value | USD 125,000 class project |
| Umfang | Ausrüstung, Versand- und Installationsunterstützung |
| Mischen | Rutschenkomplex, Kletternetze, Schaukeln, toddler area |
| Klima | Tropische Hitze, humidity, typhoon season |
Alle Angaben sind Richtwerte und werden im Planungsvorschlag für Ihren Standort bestätigt. Design follows recognised playground safety principles such as IN 1176.
Structures and Surfacing
The anchor slide complex carried multiple lanes so throughput stays high on holidays, with climbing towers and net elements providing a route for older children. Surfacing was installed per zone with depth recorded against the highest fall height, which matters where heavy rain can wash loose material out of position.
Drainage and Storm Planning
Falls were set so water leaves the play and landing zones rather than pooling, and access paths were designed to stay usable after a downpour. The park also keeps a simple storm routine: inspect the site after severe weather, check fixings and netting, and record anything that needs attention before reopening.
Shade and Family Comfort
Shade was installed over the busiest structures and the seating before secondary equipment was added. At this latitude the difference is measurable: families stay through the middle of the day instead of leaving at noon, which is what the operator needed to justify the investment.
Operating Model After Opening
The park runs two to four attendants plus a supervisor, with a daily inspection of structures, netting and surfacing. Entry is priced simply, and capacity is managed at the gate rather than on the equipment. The same operating logic appears in our non powered park guide.
Themen- und Finish-Optionen
Optionen, die Sie vor Produktionsbeginn festlegen können: Layout, mix, shade strategy and surfacing specification.
Wir zitieren als direkt Gerätehersteller von a 125,000 m² Produktionsfläche, Das technische Gespräch und das kommerzielle Gespräch finden also am selben Ort statt, mit 20 Jahrelange Exportprojekte stecken hinter der Antwort. Nicht angetriebene Strukturen werden mit Fallhöhendaten und Oberflächenempfehlungen für jede Plattform und jeden Rutschenausgang geliefert.
Senden Sie Ihren Grundstücksplan und Ihren bevorzugten Belag – Wir werden ein Layout mit Fallhöhen zurückgeben, Beschattungsstrategie und eine abgestufte Ausrüstungsliste.
