In a climate with long winters, an indoor play centre is not seasonal – it trades hardest exactly when outdoor attractions are closed.
The venue was designed as a year round business, with a structure sized to the unit, party rooms for weekend bookings and a cafe that supports long visits.
Ključne specifikacije
| Postavka | Referenca |
|---|---|
| Država | Belarus |
| Vrsta projekta | Notranji mehki igralni center |
| Tlorisna površina | 460 sq m class project |
| Podnebje | Cold winters, long indoor season |
| Področje uporabe | Oblikovanje, equipment and installation support |
| Delovanje | Sessions, zabave in kavarna |
Vse številke so referenčne vrednosti in so potrjene v inženirskem predlogu za vašo lokacijo.
Designing Around the Unit
Ceiling height and column positions set the structure size, and the layout reserved the tallest elements for the rear of the unit so sight lines stay open from the entrance. Toddler equipment sits nearest the seating, with the main structure behind it for older children.
Materials for Heavy Use
Because the venue trades daily through the winter, materials were specified for commercial intensity: reinforced vinyl covers, closed cell foam padding and steel frames with protective coating. Removable covers on high contact surfaces make the cleaning routine realistic rather than aspirational.
Parties and Cafe
Party bookings carry the highest margin in an indoor venue, so two rooms were reserved with independent access and storage. The cafe was positioned to look across the play structure, keeping parents on site and lifting food spend.
Operating Routine
Staff run a daily check of netting, oblazinjenje in pritrditve, an hourly cleaning rotation for soft surfaces and ball pools, and a written log that supports both inspections and insurance. The approach follows igrišče safety practice and the same planning logic we set out for a 300 sqm venue.
Prilagajanje namestitve
Možnosti, ki jih lahko določite pred začetkom proizvodnje: Tema, structure layout, party rooms and cafe.
Citiramo kot neposredno proizvajalec opreme od a 125,000 m² proizvodne baze, tako se tehnični pogovor in komercialni zgodita na istem mestu, z 20 leta izvoznih projektov za odgovorom. Notranje instalacije so dobavljene s preverjanji obremenitve tal in stropa, ker ti dve številki odločata o tem, kaj je mogoče namestiti.
Pošljite tloris in višino stropa – vrnili bomo conski načrt z zmogljivostjo, seznam opreme in cenik.
