A carousel in central Europe has to survive frost, salt and months of low use, so the specification changes before it changes anywhere else.
This project in the Czech Republic shows what changes when the same ride is specified for a cold climate rather than a tropical one.
Wichtige Spezifikationen
| Artikel | Referenz |
|---|---|
| Standort | Czech Republic |
| Projekttyp | Zweistöckiges Karussell für einen Park |
| Kapazität | 48 Fahrer auf zwei Ebenen |
| Klima | Cold winters and wet springs |
| Design | Protected drive and weather resistant finishes |
| Aushändigen | Commissioning records and spares |
Alle Angaben sind Richtwerte und werden im Planungsvorschlag für Ihren Standort bestätigt. Galvanised steel and coated fasteners are specified wherever moisture collects. See galvanised for background.
Specifying for a Cold Climate
Cold climates demand different protection: low temperature lubricants in the drive, sealed and heated control cabinets, and finishes that resist freeze-thaw cycles. Drainage around the platform matters as much as the finish, because water that freezes under the base lifts concrete. Those specification changes are agreed at order stage, not discovered at commissioning.
Plattform, Frame and Figures
The installation followed the standard four stage sequence – Plattform und Mittelsäule, Drehrahmen und Antrieb, upper structure and stairs, dann Zahlen, Ausstattung und Beleuchtung. Figures and decorative parts were crated separately to protect painted surfaces, and the crew worked to the factory sequence so the upper floor was never loaded before the frame was aligned.
Winter Care and Annual Restart
A carousel in this climate has two operating seasons and one long inspection window. Before winter the drive is greased for low temperature, the canopy is checked for water traps and the platform is cleared of debris. At the start of the season the routine is a full electrical check, brake test and a slow rotation before guests board. Unser 48 seats large carousel platform follows the same maintenance logic for parks that want the capacity without the second deck.
What the Operator Learned
The lessons from this project apply anywhere: a carousel that runs in the evening needs lighting that can be serviced quickly, and a ride that closes for a season needs a storage plan for figures, lamps and trim. Both were written into the park’s own procedures during handover, along with a recommended spares list and the contact route for technical support.
Was Sie individuell anpassen können
Die Individualisierung deckt die Teile ab, die Gäste tatsächlich wahrnehmen: Farben, Figuren, Überdachung, lighting programme and platform finish.
Der Hersteller Hier ist die Fabrik selbst: Design, Stahlbau, Formen, Montage und Tests erfolgen alle innerhalb eines 125,000 Quadratmeter Produktionsfläche, und jede Einheit wird unter Last betrieben, bevor sie verpackt wird. Die Projektarbeit umfasst Layoutzeichnungen, Gestaffelte Ausrüstungslisten und Dokumentationen, die Sie direkt an einen örtlichen Auftragnehmer weitergeben können.
Teilen Sie uns die Standortdetails und den Termin mit, an dem Sie arbeiten – Wir werden die Phasen kartieren, die Ausstattung und die Kostenaufstellung dazu.
