This project paired a slide combination with three smaller non-powered units – a practical mix when the budget goes further by combining attractions rather than buying one large structure.
The slide combination anchors the zone, and the smaller units give younger children their own options so the main slides are not overloaded.
Belangrijkste specificaties
| Item | Referentie |
|---|---|
| Land | Filippijnen |
| Projecttype | Slide combination with play equipment |
| Contract value | USD 55,986 class project |
| Domein | Equipment supply and installation guidance |
| Mengen | Slide combination plus three play units |
| Gebruik | Outdoor family playground |
Alle cijfers zijn referentiewaarden en worden bevestigd in het technische voorstel voor uw locatie. Operators planning a similar project usually start from our fibreglass slide.
Lane Layout and Run Out
Lane count and chute profiles were chosen for family use, with enough run out that guests come to a stop before the landing zone edge. Side walls and entry handrails were specified for wet conditions, and the landing area was kept separate from the main circulation so waiting guests never cross a slide exit.
Balancing the Mix
The three play units were chosen for different ages and abilities: one for toddlers, one climbing and balancing element, and one for group play. Spreading interest across four installations raises the number of children the zone holds and reduces the queue pressure that appears when one attraction carries the whole park.
Installation and Site Preparation
Concrete pads and surfacing levels were completed before the container arrived, so installation ran inside the planned window with no site delays. Chutes are moulded composite and frames are protected steel, so the handover focused on joint checks, side wall fixings and the surfacing survey.
Maintenance for a Slide Led Zone
Daily checks cover chute surfaces, handrails and landing areas; weekly work covers joint bolts, frame fixings and netting where fitted. Damaged gel coat is repaired before water reaches the laminate, which is the single most important habit for fibreglass slides in a wet climate.
Gemaakt om bij uw park te passen
Jij bepaalt de uitstraling, wij houden de technische standaard aan: Aantal rijstroken, chute profiles, colours and play unit selection.
De fabrikant hier is de fabriek zelf: ontwerp, staalwerk, gieten, assemblage en testen gebeuren allemaal binnen een 125,000 vierkante meter productiebasis, en elke eenheid wordt belast voordat deze wordt verpakt. Niet-aangedreven constructies worden geleverd met valhoogtegegevens en aanbevelingen voor de oppervlakte voor elk platform en elke glijbaanuitgang.
Stuur uw kavelplan en ondergrondvoorkeur mee – wij retourneren een indeling met valhoogtes, schaduwstrategie en een gefaseerde uitrustingslijst.
